Description

Product highlights fits most flat-panel TVs with screen sizes from 42"-90" heavy-gauge steel construction with brushed metal finish supports up to 125 lbs. mount holds TV approximately 2-1/4"-28" from wall swivel range: ±57° tilt range: +5°/-15° covered channels in arms and mount keep cables hidden stud-mounting required post-install leveling adjustments includes all necessary hardware 33-7/8"W x 17-11/16"H x 2-3/16"D warranty: 10 years What's in the box Wall bracket Articulating arm assembly Vertical TV bracket 2 Horizontal TV brackets Four M5x10mm screws Four M6x12mm botls Four M6x35mm bolts Four M8x16mm bolts Four M8x25mm bolts Four M8x35mm bolts Four M8x50mm bolts Four M6/M8 washers Four 2.5mm spacers Four 5mm spacers Four 22mm spacers Four 5/16" x 3-1/2" lag bolts 4 Concrete anchors 10-32 x 3/8" Securement screw 2 Cover plates 3/32" Hex-key 5/32" Hex-key Instruction Manual About this item Written by Crutchfield's Ralph Graves A stylish mount for your TV The Sanus VisionMount® VLF728-B2 adds a bit of style to your TV's wall-mount installation. Its design is inspired by high-end kitchen appliances, with smooth, rounded lines and a brushed metal finish. This stylish mount hold your TV just 2-1/4" from the wall when fully retracted. Just pull on the mount and it smoothly extends outward up to 28". An integrated cable management system keeps wires organized and out of sight without interfering with the motion of the extending arm. This durable heavy-gauge steel mount supports a TV with a screen size up to 90" and weighing up to 125 lbs. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. And you can make fine adjustments after installation to keep your TV leveled. Will this mount work with my TV? Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV. Where do I drill the holes? Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.